reloading primer shortage

Reloading Primer Shortage - It's no secret that the industry is currently facing tough times. With ammo, firearms prices inflated to an all-time high, firearms enthusiasts of all kinds are beginning to feel the stress of an industry growing amid uncertainty. Chargers, a fairly niche subset of firearms enthusiasts, are not exempt from this tumultuous time. If you have been looking at any type of reloading components (brass, bullets, powders and caps) you will be hard pressed to find anything in stock at the prices they were and even the overpriced stuff seems to be empty shelves, what happened? Especially the former are almost impossible to find, except for opportunistic ferrymen who sell them on the Internet for more than four times the normal price. So where did everyone go first?

Depending on your market, it may be normal for primers to disappear from the shelves as soon as they arrive. Personally, I have tried to make it a regular habit to buy a box (1000 copies) or a few drawers at any given time. I pass by a store that has them. It used to cost about forty or fifty dollars, depending on what the particular store was charging. You usually pay about 3 cents per example.

Reloading Primer Shortage

Outside of normal circumstances, the first thing that will come to mind for many in terms of contributing factors would be the various lockdowns, closures and travel restrictions imposed by various governments due to the COVID-19 situation. The simple fact that the entire world is affected by this situation means that many Americans are now finding a lot of free time on their hands sitting at home.

The Great Ammo Shortage Of 2022 Isn't Over

Now, the fear of a pandemic alone would not be enough to cause this massive shortage (at least I personally don't think it's the main cause). The rise in civil unrest over the past year has given many reasons for alarm. As a result, not only did longtime gun owners buy additional ammunition, but new gun owners joined the fray as street violence continued to move out of the cities and filter into the suburbs.

It's also worth mentioning that about 6.2 million new gun owners entered the market in the last two months alone. 6.2 million rifles will require at least a box of ammo and probably more, and when you factor that in you can start to see how there could be some real pressure on ammo supplies. The last factor I'll briefly mention here is that many gun owners, both new and seasoned, are very frightened by the prospect of an outright anti-amendment from the US Senate and the President.

With all of these factors happening at the same time, ammunition of nearly every caliber has flown off the shelves and into the hands of fearful buyers facing uncertainty. The subsequent ammo shortage led many to reload, thinking they could bypass the manufactured ammo scene and do some of the work themselves.

In my experience, reloaders tend to anticipate even subtle changes in the market that will affect their hobby. Because of this, most of the time you will find that many reloaders work like me and regularly buy large components (for me 10,000 at a time). The threat of any kind of stock shortage usually prompts me to make larger than usual purchases to combat whatever nonsense is about to be shipped.

Prime All Repriming Compound

Others look at this situation and will start liquidating their savings in the hope of making a big return by selling starters after the stock runs out. There is nothing legally wrong with it or maybe even morally wrong, but it causes a lot of anger in many people. However, I don't think hoarders or scalpers are the main reason why everyone left in the first place. I think it has more to do with the aforementioned convergence of factors causing high demand with continued disruptions in the printer manufacturing supply chain.

The first factor that needs to be brought to light is the fact that there are currently only four companies making starters for civilian use and with a whole nation of reloaders trying to get starters combined with the increasing restrictions on business due to COVID. , the industry struggled to keep up with out-of-control demand. As a side note, of these 4 manufacturers, one of them is currently undergoing a major restructuring of their company and this is definitely having an impact on their primer production.

It also doesn't help that there are rumors that all four primer manufacturers (CCI, Federal, Winchester, and Remington) are diverting much of their primer production to commercial ammo manufacturers and shortening what they would normally send to dealers as standalones. component

Component shortages seem to have happened about every 5-7 years as I recall, and as I recall they only get worse as time goes on, doubly so this time the foreign primer suppliers are experiencing the same thing. if not worse, industry disruptions and a drop in demand. Therefore, the foreign relief in the form of imported starters does not help much in facilitating the supply chain of starters.

Trying To Reload Your Own Ammo? There Is Now A Primer Shortage

I have some confidence that the market will eventually return to something like normal. Maybe sometime in 2021. This is the worst primer (or any component) shortage I've ever seen in my life and situations like this are one of the reasons I usually have so many small explosives on hand, so as not to deny access to others. but to save for a rainy day like this. The best thing we can do at times like these, as our reserves run out, is to prioritize the time we spend looking for them.

Many shops will receive regular shipments of primers and components and have set strict limits on the amount customers can purchase so that others can have a fair chance of access if they are willing to come. Even Big Box stores like Academy and Sportsmans Warehouse allow customers to purchase items online (typically limit 1 to 1,000 starter boxes) and pick them up in store when they arrive.

What do you think about the great shortage of wallets in 2020? Will the chargers be able to continue operating despite the high demand? Will the market soon recover to something resembling normalcy, or are we in for a protracted component scramble with no end in sight? Your thoughts and comments are welcome below.

We are dedicated to finding, researching and recommending the best products. We earn commissions from purchases you make through retail links in our product reviews. Learn more about how this works. With the nation's major ammunition manufacturers insisting there is little they can do to alleviate endless ammo shortages and ever-rising prices, a young company, Expansion Ammunition, wants to help make shooting affordable again. Expansion isn't even 10 years old as a company, but it's building a 200-acre ammunition manufacturing campus in Texas and is poised to become the next big player in the factory ammunition game.

Cci Primers « Daily Bulletin

"We have plenty of space to expand and are not leasing. We intend to be a major employer in the area for the foreseeable future," said Richie Smissen Jr., national director of marketing for the expansion. He co-owns the company, along with his father, Richard, who is the company's president. Richie's brother and uncle are also co-owners. - It is definitely a family business.

"During the last major ammunition shortage, my father, brother and I decided that it was wrong that we, as Americans, could not access affordable, quality firearms products. The expansion began because we deeply believe in the Second Amendment."

About a year ago, Expansion Ammunition purchased the former Lone Star Army Ammunition Plant west of Texarkana, Ill., and is nearing completion of a $35 million construction project there that will house a production facility dedicated exclusively to the production of primers. The company hopes to soon produce its own brass cases and projectiles, so all components of the expansion ammunition will be made in Texas, except for the gunpowder.

The company currently has corporate offices in Dallas and R&D and manufacturing operations out of Joplin, Missouri, with its newest facility in Texas. Expansion's history is very American, born out of the need for humble beginnings.

Ammo Shortage Continues Into New Year

The site of the former Lone Star Government Ammunition Plant was built during World War II. Expansion bought a 200-acre parcel from the state and is constantly renovating it.

"The expansion literally started in my mom's basement. I taught myself to load after college, and a lot of it had to do with the last big ammo scare during the Obama years."

Hand primer for reloading, reloading primer sealer, reloading primer sealant, berdan primer reloading, reloading powder shortage, reloading hand primer tool, boxer primer reloading, reloading primer, primer tool reloading, reloading primer tools, primer chart for reloading, 9mm reloading primer